Avaya G700, Installing And Upgrading, Page: 253 / 808

Before going to the customer site
Issue 10.2 May 2007 253
Checking a pre-4.0 release
To ensure that a super-user login exists in Communication Manager prior to Release 4.0:
1. Log in with
telnet
or
ssh
.
2. At the SAT command line, enter
list logins
The Logins screen appears.
3. Under the Service Level column, look for a login that has either the
dadmin
or
super-user
level.
4. If a super-user login does not exist, create one. See Creating a super-user login, if one does
not exist (releases earlier than Release 4.0) on page 254.
Checking a 4.0 release
To ensure that a super-user login exists in Communication Manager in Release 4.0 or higher:
1. Log in with
ssh
.
2. At the Linux command line, type
cat /etc/passwd |grep 555
.
The following list of super-user logins appears.
3. Look for any logins other than the init, inads, and craft logins. If no additional super-user
logins exist, you must create one. See Creating a super-user login, if necessary, for R4.0 or
higher on page 255.
list logins
LOGINS
Login Service Status Pwd. Aging ASG Blk Expiration No. of Sess.
Level Cycle (Days) Date Sess. Used
init init active y n / /
inads inads inactive y n / /
dadmin dadmin inactive n n / /
craft craft inactive y n / /
acpsnmp non-super-user void n n / /
init:x:778:555::/var/home/defty:/bin/bash
inads:x:779:555::/var/home/defty:/bin/bash
craft:x:780:555::/var/home/defty:/bin/bash
dadmin:x:1001:555::/var/home/defty:/bin/bash
erik:x:1002:555::/var/home/defty:/bin/bash