Avaya G700, Installing And Upgrading, Page: 183 / 808

Administering an S8400, S8500, or S8700-series primary controller
Issue 10.2 May 2007 183
IP Network Region Screen, Page 3
4. Type the number for the type of codec set (1–7) that the S8400, S8500, or S8700-series
Media Server will use to interconnect the G700 and the C-LAN board(s) in the row
corresponding to the region of the C-LAN.
In this example, the C-LAN is in region 9 and codec-set type 3 is to be used for the
interconnection between region 1 and region 9. (In this example, codec type 1 is used for
communication within region 1)
The SAT command, list ip-codec-set , lists the types of codecs available on this server.
For more detail about the Inter Network Region Connection Management form, see
Administration for Network Connectivity for Avaya Communication Manager , 555-233-504.
5. Press F3 ( Enter ) when complete.
Assigning LSPs to the Network Regions
If the primary controller has LSPs, you can assign the LSPs to network regions. In the event of
a network failure, IP telephones assigned to a network region will register with the LSPs
assigned to that region.
This procedure assigns up to six LSPs to a network region.
display ip-network-region 1 Page 3 of 19
Inter Network Region Connection Management
src dst codec direct Dynamic CAC
rgn rgn set WAN WAN-BW-limints Intervening-regions Gateway IGAR
1 1 1
1 2
1 3
1 4
1 5
1 6
1 7
1 8
1 9 3
1 10
1 11
1 12
1 13
1 14
1 15