manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 176 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 176

Installing a new G700 with an S8300 using the Avaya Installation Wizard

176 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

 

1. At the SAT prompt, type 

change ip-network-region 1

.

The S8300 displays the 

IP Network Region

 screen.

IP Network Region Screen 

2. If necessary, complete the fields as described in 

Administration for Network Connectivity for 

Avaya Communication Manager

, 555-233-504.

Note:

Note:

It is strongly recommended to use the defaults in the screen. However, for the 

RTCP Enabled 

and 

RSVP Enabled 

fields, the entry should be 

n

 (no).

3. Press 

F3

 (

Enter

) to submit the screen.

Associating LSPs with Network Regions

If the primary controller has LSPs, you can associate each LSP with one or more network 
regions. In the event of a network failure, IP telephones assigned to a network region will 
register with an LSP associated with that region.

This procedure associates up to six LSPs with a network region.

change ip-network-region 1 

Page   1 of   19 

                               IP NETWORK REGION

Region: 1  

Location:

Authoritative Domain:

    Name: 

MEDIA PARAMETERS

Intra-region IP-IP Direct Audio: yes

Codec Set: 1

   

 Inter-region IP-IP Direct Audio: yes

UDP Port Min: 2048

 

             IP Audio Hairpinning? y

UDP Port Max: 3048

DiffServ/TOS PARAMETERS

RTCP Reporting Enabled? n

 Call Control PHB Value: 34

RTCP MONITOR SERVER PARAMETERS

Audio PHB Value: 46

Use Default Server Parameters? y

Video PHB Value: 26

802.1P/Q PARAMETERS

 Call Control 802.1p Priority: 7

Audio 802.1p Priority: 6

 

Video 802.1p Priority: 5

AUDIO RESOURCE RESERVATION PARAMETERS

H.323 IP ENDPOINTS

RSVP Enabled? n

H.323 Link Bounce Recovery? y

 Idle Traffic Interval (sec): 20

   Keep-Alive Interval (sec): 5

  

Keep-Alive Count: 5

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments