manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 163 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 163

Using the Avaya Installation Wizard (IW)

Issue 10.2 May 2007

163

 

Endpoint installation

For instructions on endpoint installation, do one of the following:

●

Click 

Continue

 from the CO Trunk List screen, or

●

Click 

Endpoints

 from the main menu.

The Endpoint Installation screen appears. You can access endpoint installation information 
from this screen.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments