manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 157 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 157

Using the Avaya Installation Wizard (IW)

Issue 10.2 May 2007

157

 

Adding a trunk

To add a new trunk:

1. Click 

Add IP Trunk

. The IP Trunk Configuration screen appears.

2. Enter the required information in the IP Trunk Configuration screen and click 

Continue

. The 

IP Trunk List appears, with the new trunk included in the list of trunks. To add an additional 
trunk, click 

Add IP Trunk

 and repeat this step. When you are finished adding trunks, click 

Continue

 or select an action from the 

Actions

 column to modify an existing trunk.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments