Avaya G700 Installing And Upgrading Download Page 119

Page: 119 / 808

Before Going to the Customer Site

Issue 10.2 May 2007

119

7. If you are a Business Partner, scroll to the bottom of the page and select

Download Center

to access the password protected Download Center. Otherwise, for Avaya, click on

Latest

Avaya Communication Manager x.x.x Service Pack

to access the service pack

download

The File Download window displays.

File download window

8. Click the

Save

button and browse to the directory on your laptop in which you want the file

saved.

Obtaining service pack and language files for IA770 INTUITY
AUDIX Messaging, if necessary

If IA700 will be installed, determine whether an service pack is needed and/or optional
languages are used. If so, obtain the data files.

Obtaining an IA770 service pack file

If an IA770 service pack is required after the upgrade, obtain the service pack file from the
Avaya Support web site.

To obtain an IA770 service pack file

1. On the Avaya Support Web site, click on

Find Documentation and Downloads by

Product Name

2. Under the letter "I", select

IA 770 INTUITY AUDIX Messaging Application

3. Click on

Downloads

To download the IA770 patch software:

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for G700

Reviews:

Avaya G700, Installing And Upgrading, Page: 119 / 808

Search results

Summary of Contents for G700

Reviews: