91
Installing the Avaya™ S8700 Media Server with Avaya™ G600 Media Gateway
May 2003
Circuit Pack Installation
!
CAUTION:
When handling circuit packs or any components of an Avaya G600 Media Gateway,
always wear an authorized wrist ground strap. Connect the strap to the ground connector
provided on the media gateway.
Circuit Pack Slot Loading
1
Check the reinstalled circuit packs. All of the circuit pack slots in the Avaya G600 are
“universal slots.” Any slot can contain any type of port circuit pack except that the
TN2312AP IP Server Interface circuit pack must be installed in slot 2 of media
gateway A. See
‘‘Avaya G600 Media Gateway and slot numbering’’ on page 92
2
Load all port circuit packs. See
‘‘Circuit pack installation order (loading)’’ on page 92
for
the recommended circuit pack layout.
TN780
Tone-Clock
No
TN787K
Multimedia Interface
No
TN788B
Multimedia Voice Conditioner
No
TN790B
Processor
No
TN792
Duplication Interface
No
TN794
Network Control/Packet Interface (NetPkt)
No
TN798B
Processor
No
TN1648B
System Access/Maintenance
No
TN1650B
Memory
No
TN1654
DS1 Converter - T1, 24 Channel/E1, 32 Channel
No
TN1655
Packet Interface
No
TN1656
Tape Drive
No
TN1657
Disk Drive
No
TN2182B
Tone-Clock - Tone Detector and Call Classifier
No
TN2202
50-Hz French Ring Generator
No
TN2208
AUDIX
No
TN2301
Survivable Remote Logic Switch
No
TN2308
Direct Inward Dialing Trunk
No
TN2401
Network Control/Packet Interface
No
TN2404
Processor
No
Non-Allowable Circuit packs and Circuit Modules — Continued
Apparatus code
Name
Allowable
