77
Installing the Avaya™ S8700 Media Server with Avaya™ G600 Media Gateway
May 2003
1
Connect the UPS to an electrical outlet capable of handling the power requirements of
the media gateway:
a
100 volts AC, 4.5 amps
b
120 volts AC, 3.8 amps
c
200 volts AC, 2.3 amps
d
220 to 240 volts AC, 2.0 amps
2
Ensure that the media gateway is connected to an “nonswitched” or “always on”
electrical outlet on the UPS.
3
For an Avaya UPS, connect and administer the UPS.
NOTE:
If an Avaya UPS is wired as recommended, holdover time for each power outage is
1 minute before an automatic shutdown. A UPS may handle any subsequent power outage
based on its total battery capacity.
Media Gateway Power Switch
!
DANGER:
The latch on the power supply acts as the DC power switch and only removes DC
power from the backplane, not the AC power. To remove the AC power from the
media gateway, pull the AC power cord from the back of the media gateway.
