![Avaya G600 Installing Manual Download Page 247](http://html1.mh-extra.com/html/avaya/g600/g600_installing-manual_3027010247.webp)
247
Migrating to an Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
Testing the Complete Configuration
May 2003
Test integrated announcement
The TN750B/C and TN2501AP Announcement circuit packs provide the ability to store
messages. The messages can be recorded from telephones on- or off-premises and have flexible
message lengths. The telephone selected as the test telephone must have a class of service
(COS) with console permission enabled.
Record announcement
1
Select a test telephone with console permissions enabled.
2
Dial the access code followed by the integrated announcement extension number.
3
When you hear a dial tone, press 1. When you hear a beep or stutter tone, speak the
announcement into the telephone.
4
When done, press # if a digital phone or hang up if an analog phone to stop the recording.
You then hear a dial tone.
Playback announcement
1
If using a digital phone, press 2 to hear the announcement. When the announcement is
over, you hear a dial tone. If satisfied, hang up.
2
If using an analog phone, dial the integrated announcement extension number to hear the
announcement. When the announcement is over, you hear a dial tone. If satisfied, hang
up.
Delete announcement
1
Dial the access code followed by the integrated announcement extension number.
2
When you hear a dial tone, press 3 to delete the announcement and end the recording
session. A confirmation tone is heard when the announcement is deleted.
Test music-on-hold
Verify music is provided to a held party during any hold interval.
Test emergency transfer (S8700 Multi-Connect
only)
Put configuration in emergency transfer mode and make call using emergency transfer
telephone. There may be up to 4 Emergency Transfer panels on a wall in the phone closet,
depending on the configuration.
Test remote access interface
Test the communication link between the media server and the remote access interface and
verify the alarm notification process. Make a remote test from the remote interface to the Avaya
S8700 Media Server and a local test from the Avaya S8700 Media Server to the remote
interface.