Ethernet port configuration
Issue 1 January 2008
375
Ethernet port configuration
set port auto-negotiation-flowcontrol-advertisement
Use the
set port auto-negotiation-flowcontrol-advertisement
command to set
the flowcontrol advertisement for the specified port when performing auto-negotiation.
Syntax
set port auto-negotiation-flowcontrol-advertisement
module
/
port
{no-flowcontrol|asym-tx-only|sym-only|sym-and-asym-rx}
Parameters
User Level
read-write
Context
general
Parameter
Description
Possible
Values
Default
Value
module
Number of the module
port
Number of the port on the module.
You can also specify a range of ports
separated by a dash, for example, 10/5-6
for both ETH LAN ports 5-6 on the front
panel.
no-flowcontrol
Keyword specifying that the port will
advertise no pause capabilities
asym-tx-only
Keyword specifying that the port will
advertise asymmetric Tx pause
capabilities only
sym-only
Keyword specifying that the port will
advertise symmetric pause capabilities
only
sym-and-asym-rx
Keyword specifying that the port will
advertise both symmetric and asymmetric
Rx pause capabilities
Summary of Contents for G450 Manager
