DNS resolver
Issue 1 January 2008
351
show protocol
Use the
show protocol
command to display the status of a specific management protocol,
or all protocols.
Syntax
show protocol
[ssh|telnet-client|ssh-client|https|snmp|telnet|telnet-services|http|
scp|icmp|recovery-password|ftp-client|tftp|dhcp|dns-client]
Parameters
Parameter
Description
Possible
Values
Default
Value
ssh
Keyword indicating to display the status of
the ssh protocol
telnet-client
Keyword indicating to display the status of
the telnet-client protocol
ssh-client
Keyword indicating to display the status of
the ssh-client protocol
https
Keyword indicating to display the status of
the https protocol
snmp
Keyword indicating to display the status of
the SNMP protocol
telnet
Keyword indicating to display the status of
the telnet protocol
telnet-services
Keyword indicating to display the status of
the telnet protocol on the Services
interface
http
Keyword indicating to display the status of
the HTTP protocol
scp
Keyword indicating to display the status of
the SCP protocol
icmp
Keyword indicating to display the status of
the ICMP protocol
recovery-password
Keyword indicating to display the status of
the recovery-password protocol
ftp-client
Keyword indicating to display the status of
the FTP-client protocol
tftp
Keyword indicating to display the status of
the TFTP protocol
Summary of Contents for G450 Manager
