manualshive.com logo in svg

Avaya Ethernet Routing Switch 8300, Installation Manual, Page: 8 / 96

Share
Download
Avaya Ethernet Routing Switch 8300 Installation Manual Download Page 8

ICES Statement (Canada only)

Canadian Department of Communications Radio Interference
Regulations

This digital apparatus (8300 Series chassis and installed components) does not exceed the
Class A limits for radio-noise emissions from digital apparatus as set out in the Radio
Interference Regulations of the Canadian Department of Communications.

Règlement sur le Brouillage Radioélectrique du Ministère des
Communications

Cet appareil numérique (8300 Series chassis) respecte les limites de bruits radioélectriques
visant les appareils numériques de classe A prescrites dans le Règlement sur le brouillage
radioélectrique du ministère des Communications du Canada.

CE Marking Statement (Europe only)

EN 55 022 Statements

This is to certify that the Avaya 8300 Series chassis and components installed within the
chassis are shielded against the generation of radio interference in accordance with the
application of Council Directive 2004/108/EC. Conformity is declared by the application of EN
55 022 Class A (CISPR 22).

 Caution:

This device is a Class A product. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case users are required to take appropriate

measures necessary to correct the interference at their own expense.

Regulatory Information and Safety Precautions

8     Installation — Modules

May 2011

Summary of Contents for Ethernet Routing Switch 8300

































































































Reviews:

No comments