Avaya ERS 8600 series, Configuration Manual

Page: 328 / 420

Variable Value
acl-id Specifies an ACL ID in the range 1–4096.
create <type> act <value>
[pktType] <value> [name <value> ]
Creates an access control list (ACL) only when an
ACT is associated with that ACL:
• <type>: type of ACL, including [InVlan | outVlan |
InPort | outPort].
• act <value>: an ACT template ID in the range from
1–4096.
• pktType <value>: ipv4 or ipv6
• name <value>: an optional parameter that specifies
a descriptive name for the ACL using 0–31
characters. If you do not enter a name when you
create the ACL, a default name is generated, for
example, ACL-2 for acl-id = 2
Important:
The pktType field is optional for IPv4 traffic filters. It
is required if you apply the ACL to IPv6 packets.
delete Deletes an ACL.
Important:
This command removes all VLANs or brouter ports
under this ACL and deletes all ACEs. The
command does not delete the ACTs.
disable Disables the ACL state along with all of the ACEs
below it. The default value is disable.
enable Enables the ACL state along with all of the ACEs
below it.
Enable is the default state for the ACL.
info Displays information about the ACL.
name <value> Renames an ACL.
Configuring global and default actions for an ACL
Configure global and default actions for an ACL to apply the configuration globally.
IPv6 traffic filter configuration using the CLI
328 Configuration — IPv6 Routing November 2010