Avaya ERS 8600 series, Configuration Manual

Page: 313 / 420

Variable Value
VlanList Identifies an array indicating all the VLANs associated with
the ACL entry. The value is used only with inVlan and
outVlan ACL types.
PortList Specifies the ports added to the ACL entry. The value is
used only with inPort and outPort ACL types.
DefaultAction Specifies the action taken when no ACEs in the ACL match.
Valid options are deny and permit, with permit as the
default.
GlobalAction Indicates the action applied to all ACEs that match in an
ACL:
• none
• mirror
• count
• mirror-count
Important:
Mirroring is not supported for egress filters in the Avaya
Ethernet Routing Switch 8800/8600 Release 4.1
software.
State Enables or disables all of the ACEs in the ACL. The default
value is enable.
PktType Specifies if the packet type is IPv4 or IPv6.
Modifying an ACL
Modify an ACL to change the configuration.
Procedure steps
1. In the navigation tree, open the following folders: Configuration, Security, Data
Path .
2. Double-click Advanced Filters (ACE/ACLs) .
3. Click the ACL tab.
4. Double-click the field you want to change.
For example, if you double-click the GlobalAction field, you can select from several
options in the activated list.
5. Select the required option.
6. Click
Apply to commit the required action.
Modifying an ACL
Configuration — IPv6 Routing November 2010 313