Avaya ERS 8600 series, Configuration Manual

Page: 310 / 420

Procedure steps
1. In the navigation tree, open the following folders: Configuration, Security, Data
Path .
2. Double-click Advanced Filters (ACE/ACLs) .
3. Double-click the required attribute field on the ACT tab.
4. Select the required options.
5. Click
OK to apply the required attributes.
6. In the Apply column for the modified entry, ensure that True is selected.
7. Click Apply .
The specified attributes field on the ACT tab updates.
Important:
You can only modify an ACT once. If you require further modifications, delete the entry and
create a new ACT with the required attributes.
Inserting a pattern in an ACT
Insert a pattern in an ACT to apply the template.
Procedure steps
1. In the navigation tree, open the following folders: Configuration, Security, Data
Path .
2. Double-click Advanced Filters (ACE/ACLs) .
3. Select the ACT in which to insert a pattern.
4. Click the
Pattern button.
5. Click Insert .
Important:
An ACT uses IPv4 or IPv6 attributes, but not both. You cannot combine IPv4 and
IPv6 attributes in the same ACL.
6. Select the required options in the dialog box.
7. Click
Insert .
Variable definitions
Use the data in the following table to configure the Pattern tab.
IPv6 traffic filter configuration using Enterprise Device Manager
310 Configuration — IPv6 Routing November 2010