Avaya ERS 8600 series, Configuration Manual

Page: 265 / 420

Variable Value
holddown-timer <0-3600> Defines how long the RSMLT switch does not
participate in Layer 3 forwarding.
0-3600 is the timer value in seconds.
To set this value to the default value, use the default
operator with this command.
Avaya recommends that you configure this value to be
longer than the anticipated routing protocol
convergence.
holdup-timer <seconds> Defines how long the RSMLT switch maintains
forwarding for its peer.
seconds is the timer value in seconds. The value is
a range from 0 to 3600 seconds or 9999. 9999
means infinity.
To set this value to the default value, use the default
operator with this command.
Showing IP RSMLT information
Show IP RSMLT information to view data about all RSMLT interfaces. The output of the
command includes the IPv6 formation for the local and peer nodes.
Prerequisites
Access privExec Configuration Mode or Global Configuration Mode.
Procedure steps
Display RSMLT information about the interface by using the following command:
show
ip rsmlt [<local|peer>]
Variable definitions
Use the information in the following command to complete the
show ip rsmlt
command.
Showing IP RSMLT information
Configuration — IPv6 Routing November 2010 265