Avaya ERS 8600 series, Configuration Manual

Page: 240 / 420

Job aid: Roadmap of IPv6 VRRP ACLI commands
The following table lists the commands and their parameters that you use to complete the
procedures in this section.
Table 21: Roadmap of IPv6 VRRP commands
Command Parameter
FastEthernet/Gigabit Ethernet/VLAN Interface Configuration Mode
ipv6 vrrp <1-255> accept-mode enable
action {none|preempt }
adver-int <1-255>
backup-master enable
critical-ipv6-addr <X:X:X:X:X:X:X:X>
critical-ipv6 enable
enable
fast-adv enable
fast-adv-int <200-1000>
holddown-timer <0-21600>
priority <1-255>
ipv6 vrrp address <1-255> global <X:X::X:X>/len
link-local <fe80::X:X:X:X>
PrivExec Mode
show ipv6 vrrp
show ipv6 vrrp address link-local <fe80::X:X:X:X>
vrid <1-255>
show ipv6 vrrp interface <port-type> [<portList>] [<1-4094>]
[statistics]
vlan [<1-4094>] [<portList>]
verbose
vrid <1-255>
show ipv6 vrrp statistics link-local <fe80::X:X:X:X>
vrid <1-255>
IPv6 VRRP configuration using the ACLI
240 Configuration — IPv6 Routing November 2010