Avaya ERS 8600 series, Configuration Manual

Page: 215 / 420

Variable Value
IfIndex The index value that uniquely identifies the interface to which
this entry is applicable.
InetAddrType The address type for the VRRP interface. In this case, IPv6.
VrId A number that uniquely identifies a virtual router on a VRRP
router. The virtual router acts as the default router for one or
more assigned addresses (1 to 255).
IpAddr The additional IPv6 address that the virtual router is responsible
for backing up.
IpAddrPrefixLength The IPv6 prefix length.
Configuring VRRP notification control
Use this procedure to configure VRRP notification control.
Procedure steps
1. In the navigation tree, open the following folders: Configuration, IPv6.
2. Double-click VRRP .
3. In the NotificationCtrl box, click to enable or disable notification control.
4. Click Apply .
Variable definitions
Use the data in the following table to configure VRRP notification control.
Variable Value
NotificationCntl Indicates whether the VRRP-enabled router generates SNMP
traps for events.
• enabled—SNMP traps are generated
• disabled—no SNMP traps are sent
Configuring VRRP notification control
Configuration — IPv6 Routing November 2010 215