Avaya ERS 2500, Troubleshooting Manual

Page: 90 / 90

Showing EAP–non-EAP clients on port
Display EAP–non-EAP client information on the port to provide additional information.
1. Use the
show mac-address-table
command to show the clients on the port.
2. Observe the log output and note any anomalies.
Showing EAPOL port information
Display EAPOL port information for additional information.
1. Use the
show eapol port <port#>
command to display the port information.
2. Observe the log output and note any anomalies.
Making changes
This section provides troubleshooting guidelines for changing the EAP settings. It assists in
the cleanup of old MAC addresses.
1. Use the
eap-force-unauthorised
command to set the administrative state of
the port to forced unauthorized.
2. Use the
eapol status auto
command to change to eap-auto.
3. In the Interface Configuration Mode, use the
shut/no shut
commands.
Troubleshooting authentication
90 Troubleshooting November 2010