Avaya ERS 2500, Troubleshooting Manual

Page: 81 / 90

1. Enter the
show eapol port <port#>
command to display the information.
2. Ensure that global EAP is enabled and port is eap-auto.
Setting global eap enabled and port at eap-auto
Make required changes to enable EAP globally and to set the port status to auto.
1. Use the
eapol enable
command to enable EAP globally.
2. Use the
eapol status auto
command to change port status to auto.
Displaying EAPOL multihost
Review the EAPOL multihost information.
1. Enter the
show eapol port multihost
command to display the information.
2. Note the following:
• Use RADIUS To Authenticate NonEAPOL Clients is enabled
• Non-EAPOL RADIUS Password Attribute Format:
IpAddr.MACAddr.PortNumber
Enabling RADIUS to authenticate non-EAPOL clients
Make the required changes to the password format on the RADIUS server.
Apply changes to the RADIUS server using vendor documentation.
Formatting non-EAPOL RADIUS password attribute
Make the required changes to the password format on the RADIUS server.
RADIUS server is to have the format changed to
IpAddr.MACAddr.PortNumber
.
Non-EAP RADIUS MAC not authenticating
Troubleshooting November 2010 81