Avaya ERS 2500, Troubleshooting Manual

Page: 73 / 90

1. Use the
show eapol multihost
command to display the multihost information.
2. Note the state of Allow Use of RADIUS Assigned VLANs.
Enabling use of RADIUS assigned VLANs
Change the "allow RADIUS assigned VLAN" to "enable".
1. Use the
eapol multihost use-radius-assigned-vlan
command to allow
the use of VLAN IDs assigned by RADIUS.
2. Ensure that there are no errors after execution.
Showing EAPOL multihost interface
Display the EAPOL interface information.
1. Use the
show eapol multihost interface <port#>
command to display
the interface information.
2. Note the status of ALLOW RADIUS VLANs.
Showing VLAN config control
Display the VLAN config control information.
1. Use the
show vlan config control
command to display the information.
2. Identify if config control is set to strict.
Changing VLAN config from strict to flexible
Set the VLAN config control to flexible to avoid complications with strict.
EAP RADIUS VLAN is not being applied
Troubleshooting November 2010 73