Avaya Definity SI, Maintenance Manual, Page: 542 / 2968

Maintenance Commands and Trouble-Clearing Aids
555-233-123 8-292 Issue 4 May 2002
Other MOs Affected by this Command
NOTE:
Although alarms on some MOs appear as warnings, the alarms should be
investigated with user-related problems.
■
EPN Maintenance Circuit Pack (MAINT)
■
Expansion Interface (EXP-INTF)
■
ISDN-PRI Signaling Group (ISN-SGR)
■
Journal Printer (JNL-PRNT)
■
PMS Link (PMS-LINK)
■
PMS log printer (PMS-LOG)
■
Primary CDR Link (PRI-CDR)
■
Secondary CDR Link (SEC-CDR)
■
SPE Select Switches (SPE-SELEC)
■
Synchronization (SYNC)
■
System Communication Interface (PI-SCI)
■
System Printer (SYS-PRNT)
■
TDM Clock (TDM-CLK)
■
Tone Generator Circuit Pack (TONE-BD)
set signaling-group
This command upgrades secondary D-channel in specified signaling groups to
primary D-channels. Current primary D-channel then revert to secondary
D-channels.
A signaling group is a collection of B-channels that designate single D-channels or
a set of D-channels signals over an ISDN-PRI.
Action/Object Qualifier Qualifier Description Logins Defaults
Feature
Interactions
set
signaling-group group
identifier administered number associated with
each signaling group.
Examples:
set signaling-group 1
set signaling-group 2
init
inads
craft none none