Avaya Definity SI, Maintenance Manual, Page: 2858 / 2968

Error Messages from Chapter 8: Maintenance
Commands
555-233-123 A-54 Issue 4 May 2002
list mst
Help Messages
If the user presses HELP after entering “list mst” the following message appears:
Enter [ ’from’ 0-32767 ] [ ’count’ 1-9998 ]
[ ’fifo’ or ’lifo’ or ’continuous’ ]
[ ’auto-page’ ] [ ’print’ or ’schedule’ ]
Error Messages
If the command entered is in conflict with another currently executing command,
then a message appears showing the login id of the conflicting user and the
conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires the
user to restart the command, then the following message appears:
Command resources busy; Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message appears:
All maintenance resources busy; try again later
list suspend-alm-orig
Help Messages
[‘print’ or ‘help’]
list testcalls
Help Messages
If the system technician presses HELP after entering “list testcalls”, the following
message appears:
Please enter one of the following object command words:
detail summary
Or press CANCEL to cancel the command
If the system technician presses HELP after entering “list testcalls detail”, the
following message appears:
Enter [[’grp’ x],[’to-grp’ x],[’mem’ x],[’to-mem’ x] or [’port’ x]],
[[’result’ x] or [’not-result’ x]],[’count’ x],[’print’ or ’schedule’]