Avaya Definity SI, Maintenance Manual, Page: 2822 / 2968

Error Messages from Chapter 8: Maintenance
Commands
555-233-123 A-18 Issue 4 May 2002
Output (Page One)
The following output example shows a display of Page 1 of the change
system-parameters maintenance command.
Field Descriptions (Page One)
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
change
system-parameters
maintenance Examples:
change system-parameters
maintenance init
inads
craft
cust
rcust none none
Operations Support Parameters
Product
Identification
Identifies switch to an Operations Support System (OSS): 10-digit number
starting with 1.
First OSS
Telephone
Number
Switch reports alarms first to the First OSS telephone number (for example,
INADS or Trouble Tracker). The number must be obtained from the National
Customer Support Center (NCSC) or the TSC. (# and * are not allowed in the
telephone number.)
Abbrev Alarm
Report
Enables the Abbreviated Alarm Report feature for the first OSS. (yes)
change system-parameters maintenance Page 1 of 3
MAINTENANCE-RELATED SYSTEM PARAMETERS
OPERATIONS SUPPORT PARAMETERS
Product Identification: 1000000000
First OSS Telephone Number: 5551212 Abbrev Alarm Report? y
Second OSS Telephone Number: 5551213 Abbrev Alarm Report? n
Alarm Origination to OSS Numbers: both
Cleared Alarm Notification? y Suspension Threshold: 5_
Restart Notification? y
Test Remote Access Port? n
CPE Alarm Activation Level: none
Packet Bus Activated? n
Customer Access to INADS Port? n
Repeat Dial Interval (mins): 7
SCHEDULED MAINTENANCE
Start Time: 22: 00 Stop Time: 04: 00
Daily Maintenance: daily Save Translation: daily
Command Time-out (hours): 2
Control Channel Interchange: no System Clocks Interchange: no
SPE Interchange: no EXP-LINK Interchange: no