Avaya Definity SI, Maintenance Manual, Page: 2813 / 2968

busyout port
Issue 4 May 2002 A-9 555-233-123
busyout port
Help Messages
If the system technician presses
HELP
after entering “busyout port,” the following
message appears:
Enter 7 character port number
Error Messages
If the format of the port location is incorrect, the following error message appears:
Port/Board invalid
If the EPN on which the port resides is unavailable, the following message
appears:
EPN is not available
If the board on which the port resides is not administered, the following error
message appears:
Port not assigned
If the board on which the port resides is part of the SCI link, the following error
message appears:
Cannot busyout/release part of SCI link
If the port is translated within a Wideband Access Endpoint, the following error
message appears:
Port within wideband access endpt; Use busyout access-endpoint <ext> instead
If the command entered is in conflict with another currently executing command,
then a message appears showing the login id of the conflicting user and the
conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires the
user to restart the command, then the following message appears:
Command resources busy; Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message appears:
All maintenance resources busy; try again later