Task Table
Issue 7 November 2003
1-19
555-233-115
All:
2. In the UPDATE FILE section, check the
Update State
field for a software
patch:
■
If there is a patch number, then a patch has been applied.
■
If the field is
none in memory
, there is no software patch in
system memory.
NOTE:
If you need to restore the system to the old software version, you
must also download a patch onto the system.\
3. In the SOFTWARE VERSION section note the current software version
listed in the
Memory Resident
field.
NOTE:
Ensure that the memory, removable media, and disk software loads
and translations are current and that the current software version is
compatible with this software-only upgrade path.
Disable Scheduled Maintenance and Alarm
Origination
To prevent scheduled daily maintenance from interfering with the upgrade:
1. To prevent scheduled daily maintenance from interfering with the update or
upgrade, type change system-parameters maintenance and press
RETURN
.
2. If scheduled maintenance is in progress, set the
Stop Time
field to 1
minute after the current time.
or
If scheduled maintenance is not in progress, set the
Start Time
field to a
time after the upgrade will be completed.
For example, if you start the upgrade at 8:00 P.M. and the upgrade takes
90 minutes, set the
Start Time
field to 21:30.
!
CAUTION:
If you do not disable Alarm Origination, the system can generate
alarms, resulting in unnecessary trouble tickets.
3. Type neither in the
Alarm Origination to OSS Numbers
field and
press
ENTER.
