DEFINITY Enterprise Communication Server Release 9
Installation and Maintenance for Survivable Remote EPN
555-233-121
Issue 2
November 2000
SREPN Maintenance
2-8
SREPN connections
2
Faceplate switch
Table 2-4
indicates the 3 positions for the faceplate switch and the use for each.
Table 2-4.
Faceplate switch positions and uses
Label
Position
Use
RSTR
Top
Forces control to the Release 9r by switching from Survive mode
to Normal mode
a
a.
This switch position overrides the restore survivable-remote-link command from the SAT. See
‘‘Restore from remote location’’
later in this chapter for more information.
AUTO
Middle
Ready to go into Survive mode. The switch should be in this
position except during installation, testing, or releasing the SRP
from Survive mode.
TEST
Bottom
Forces control to the SRP (Survive mode). Links to the SREPN
are through the SRP (TN2404 Processor).
1
!
CAUTION:
This is for installation and testing only. Do not leave the
switch in this position.