manualshive.com logo in svg

Avaya CS 1000, Fundamentals

The Avaya CS 1000 user manual provides comprehensive insights into the fundamental features and functionalities of this exceptional product. Download the free manual from our website and unlock a wealth of knowledge to maximize your Avaya CS 1000 experience.

Share
Download
background image

Configuration

Prerequisites

DMLS requires DAP Controller to always be active.

Configuring DECT Messaging and Location Service

The following configuration is required to enable interworking between DMLS and SIP DECT
system (DAP Controller):

1. Add a new system using a right button of the mouse on the field in the

 DECT system

tab.

2. Enter system name, SIP DECT system PARI, DAP Controller IP address, port

28001, Application port (for example, 2010).

3. Enter the license type: Basic for messaging functionality or Location for additional

location detection functionality.

4. Enter the key and press

 OK

.

5. If you have a location license and Ekahau software click 

Settings

 tab and enter

Ekahau RTLS controller IP address in the section Location Engine IP address
(default port 8552).

6. Select 

Service

 menu and click start to launch the service.

If the connection is established, the Link is changed to up, License status – to
Valid.

7. Create an ssh connection to the IP address, where DMLS is running, using a

configured application port (for example, 2010).

Note:

 A tool for creating an ssh connection or any software for performing automatic operations

with DMLS is not provided.

When DMLS establishes a connection to DAP Controller and you set up a connection to DMLS,
you can send service commands according to the DMLS interface specification. Refer to 

Client

interface description DECT Messaging and Location Service

 provided with the DMLS software

package.

DECT Messaging and Location Service

268     SIP DECT Fundamentals

October 2012

Comments? [email protected]

Summary of Contents for CS 1000















































































































































































































































































Reviews:

No comments

Related manuals for CS 1000

IBM BladeCenter HS22 Product Manual preview
BladeCenter HS22
Brand: IBM Pages: 18
LaCie 301160U - 1TB Ethernet Disk RAID Network Attached... Quick Install Manual preview
301160U - 1TB Ethernet Disk RAID Network Attached...
Brand: LaCie Pages: 5
IBM totalstorage 200 Hardware Installation Manual preview
totalstorage 200
Brand: IBM Pages: 152
d3 Technologies d3 4x4pro Quick Start Manual preview
d3 4x4pro
Brand: d3 Technologies Pages: 10
IBM 88701RX User Manual preview
88701RX
Brand: IBM Pages: 98
IBM System x3650 M4 BD Type 5466 Installation And Service Manual preview
System x3650 M4 BD Type 5466
Brand: IBM Pages: 786
Supero SUPERSERVER 5015M-MF User Manual preview
SUPERSERVER 5015M-MF
Brand: Supero Pages: 120
IBM 1-Port USB Print Server Hardware User'S Manual preview
1-Port USB Print Server
Brand: IBM Pages: 15
Dell Force10 MXL Blade Specifications preview
Force10 MXL Blade
Brand: Dell Pages: 2
D-Link DPR-2000 Quick Installation Manual preview
DPR-2000
Brand: D-Link Pages: 40
MPI Technologies LAN Brick Eth 10 Specification Sheet preview
LAN Brick Eth 10
Brand: MPI Technologies Pages: 2
Biamp VOCIA TTS-1 Operation Manual preview
VOCIA TTS-1
Brand: Biamp Pages: 11
Measurement Computing NAP7000D User Manual preview
NAP7000D
Brand: Measurement Computing Pages: 56
3onedata ICP222-2F-2CI Quick Installation Manual preview
ICP222-2F-2CI
Brand: 3onedata Pages: 3
SMC Networks FieldServer FS-8700-60 Gardner Denver Driver Manual preview
FieldServer FS-8700-60 Gardner Denver
Brand: SMC Networks Pages: 13
MPC netframe 1610 Quick Start Manual preview
netframe 1610
Brand: MPC Pages: 72
IPX VE-3500 Installation & Operation Manual preview
VE-3500
Brand: IPX Pages: 94
Digitus DN-16100-1 User Manual preview
DN-16100-1
Brand: Digitus Pages: 16

Brands by name

Popular brands

Load more brands