Avaya CS 1000, Fundamentals

Page: 245 / 270

Note:
The image file with the handset configuration for 4027/4070/4075 DECT
Handsets has the following extension:
.x55 .
Creating an image file using a MEM card
If you’d like to have a configuration image files based on settings of a DECT Handset with a
MEM Card, perform the following steps:
1. Insert the MEM card from the configured DECT Handset in the installed card
reader.
2. 2. Select Read in Card from the menu in the DECT Handset Configurator tool.
After the card is read, you can remove it from the card reader.
3. 3. Select File > Save to save the DECT Handset configuration in a file.
Note:
The image file with the handset configuration for 4027/4070/4075 DECT Handsets has the
following extension:
.x55 .
Note:
If you used a MEM card from a DECT Handset with limited features (for example: there is
no messaging support in the 4027 DECT Handset), you can edit and configure the desired
missing settings in the DECT Handset Configurator tool before copying the image file to a
handset of another type.
Editing the image file
1. Click File > Open to open the saved image file.
2. Make the required changes.
3. Click File > Save to save the image file.
Operations with a MEM card
The DECT Handset Configurator allows you to perform the following actions on a MEM card:
• reading
• clearing
• writing
• writing batch
Reading a MEM card
Reading a card means obtaining the handset configuration data. To read a MEM card, insert
it in the card reader and select
Read from the Card menu. The DECT Handset configuration
Main operations
SIP DECT Fundamentals October 2012 245