Avaya CS 1000 Fundamentals Download Page 168

Page: 168 / 270

Removing DAP Controller software

1. Start the IP DECT Configurator. Click

Start > All programs > DAP controller >

DAP Applications > DAP configurator

2. Click

Activate/Deactivate/System Status

3. Click

Deactivate all

4. Close the IP DECT Configurator tool.

5. Click

Start > Settings > Control Panel

6. Double-click

Add/Remove Programs

7. Click

Change or Remove programs

A list of installed programs appears.

8. Select

DAP Controller

9. Click

Remove

10. Click

Yes

to confirm DAP Controller deinstallation.

DAP Controller software update

Update the DAP Controller software.

Updating the DAP Controller

1. In the IP DECT Configurator main window, click

Upgrade Installation.

2. Click

Browse

for New DAP Controller software field, browse to the folder where the

new installation file (the new DC release) is stored, select it, and click

Open

3. Optionally click

Browse

for New DAP firmware field, browse to the folder where the

new firmware (the DAP package file) is stored, select the DAP package file, and
click

Open

4. Stop IIS Admin and Diag@Net services using the buttons on the screen.

5. Click

Install

and follow the procedure.

Important:

PC restart maybe required after the system is upgraded.

System maintenance

168 SIP DECT Fundamentals

October 2012

Comments? [email protected]

Summary of Contents for CS 1000















































































































































































































































































Search results

Summary of Contents for CS 1000

Reviews:

Related manuals for CS 1000

Brands by name

Popular brands

Avaya CS 1000, Fundamentals

Search results

Summary of Contents for CS 1000

Reviews:

Related manuals for CS 1000

Brands by name

Popular brands