Avaya CallPilot 703t, Hardware Installation, Page: 19 / 52

Device Description
Ethernet hub A 10Base-T Ethernet hub provides the ELAN subnet connection
between the 703t server and the Meridian 1 switch or CS 1000
system. The customer can supply a hub or switch from third-
party vendors or from Avaya.
Because the hub is an external device, it requires an AC power
source referenced to the same ground as the 703t server and
the switch to which it is connected.
Important:
To comply with EMC requirements, a Class A hub must be
located 10 m (33 ft.) away from the 703t server.
Monitor, keyboard, and
mouse
• 15-inch monitor: NTRH9011 or N0038380 LCD monitor
Because the monitor is an external device, it requires its own
AC power source referenced to the same ground as the 703t
server and the switch to which it is connected.
• Keyboard: NTRH9013
• Mouse: NTRH9014
Reference documents
For a list of all CallPilot documents, see the following Customer Documentation Map
Table 1: Call Pilot Customer Documentation Map
Fundamentals
Fundamentals Guide (NN44200-100)
Library Listing (NN44200-117)
Planning and Engineering
Planning and Engineering Guide (NN44200-200)
Network Planning Guide (NN44200-201)
Converging the Data Network with VoIP Guide (NN43001-260)
Solution Integration Guide for Communication Server 1000/Call Pilot/Contact
Center/Telephony Manager (NN49000-300)
Installation and Configuration
Upgrade and Platform Migration Guide (NN44200-400)
High Availability: Installation and Configuration (NN44200-311)
Geographic Redundancy Application Guide (NN44200-322)
Reference documents
Avaya CallPilot® 703t Server Hardware Installation December 2010 19