Avaya CallPilot 703t, Hardware Installation, Page: 15 / 52

Slot definition and numbering
In the following table, the term "slot" refers to the available slot openings in the chassis, not
the PCI connectors inside the server.
The slots are numbered from the bottom of the server to the top. Slot 1 is the bottom slot in
the chassis when the chassis is standing upright.
Slot number Avaya CallPilot-
assigned board label
a
Meridian 1 or Avaya
Communication Server 1000
7 (not a slot) Not used Not used
PCI slot 6 (full length) BRD06 RAID card
PCI slot 5 (full length) BRD05 Not used
PCI slot 4 (full length) BRD04 MPB96 board
PCI slot 3 (full length) BRD03 Not used
PCI slot 2 (full length) BRD02 Not used
PCI slot 1 (full length) BRD01 Not used
a. In CallPilot Manager applications, the CallPilot-assigned board label may appear. This
lable corresponds to the slot number. For example, BRD01 refers to the board in slot 1.
Network connectivity
This section describes how the 703t server can be integrated into your network. The integration
depends on the type of switch you are using.
Important:
To secure the Avaya CallPilot server from unauthorized access, ensure that the CallPilot
network is inside your organization's firewall.
Slot definition and numbering
Avaya CallPilot® 703t Server Hardware Installation December 2010 15