manualshive.com logo in svg

Avaya CallPilot 600r, Maintenance And Diagnostics, Page: 70 / 106

Share
Download
Avaya CallPilot 600r Maintenance And Diagnostics Download Page 70

Figure 13: Legend/Help tab

CPTrace Tool

CP Trace Tool is a utility used to gather trace statements from the Lightweight Directory Access
Protocol (LDAP) Directory Synchronization operation. CP Trace can also be used to gather
trace statements from the CallPilot Audio Player and My CallPilot, if these applications are
resident on the CallPilot server, The following procedure describes how to gather trace
statements from LDAP Directory Synchronization only.

To access CPTrace Tool

From the Windows desktop, click Start → Programs → CallPilot → System Utilities →

CPTrace Tool.

Result: The CPTrace window appears.

Run the Directory Synchronization operation. As Directory Synchronization runs,

statements appear in the CPTrace window. Save the contents of CPTrace by clicking

Using Avaya CallPilot® system utilities

70     Avaya CallPilot® 600r Server Maintenance and Diagnostics

December 2010

Summary of Contents for CallPilot 600r











































































































Reviews:

No comments