manualshive.com logo in svg

Avaya CallPilot 600r, Maintenance And Diagnostics, Page: 68 / 106

Share
Download
Avaya CallPilot 600r Maintenance And Diagnostics Download Page 68

DSPs

In the DSP pane, each DSP is represented in a separate row. Each box in the row is one DSP
channel or multimedia channel. Click the Legend/Help tab to view descriptions of the
multimedia channel icons.

Your 600r server has one MPB96 board. The MPB96 board has 12 DSP sections embedded
on the board.

DS30X links

In the DS30X link pane, each DS30 row represents a separate DS30X link (also referred to
as a DS30 link). Each box in the row represents one DS30X channel.

The DS30X links connect the CallPilot server to the MGate card in the Meridian 1 switch or
Communication Server 1000* system. The DS30X link to the switch is supported by a cable
connection.

System Info tab

Figure 12: System info tab

 on page 69 shows an example of the System Info tab.

Using Avaya CallPilot® system utilities

68     Avaya CallPilot® 600r Server Maintenance and Diagnostics

December 2010

Summary of Contents for CallPilot 600r











































































































Reviews:

No comments