manualshive.com logo in svg

Avaya CallPilot 600r, Maintenance And Diagnostics, Page: 66 / 106

Share
Download
Avaya CallPilot 600r Maintenance And Diagnostics Download Page 66

Tab

Description

System Info

Displays details about the CallPilot System, such as features
purchased, keycode, serial number, and CallPilot server IP
addresses.

Legend/Help

Provides a description of icons and terminology displayed in the
System Monitor window.

System Monitor is a nondestructive tool that does not alter the behavior of any CallPilot
components.

To access the CallPilot System Monitor

On the Windows desktop, click Start → Programs → CallPilot → System Utilities →

System Monitor.

Result: The CallPilot System Monitor window appears. By default, the Channel Monitor

tab appears on top. Click the other tabs to view the information about those tabs.

Channel Monitor tab

The following is an example of the Channel Monitor tab when connected to a Meridian 1.*

Figure 11: Channel Monitor with M1.

Using Avaya CallPilot® system utilities

66     Avaya CallPilot® 600r Server Maintenance and Diagnostics

December 2010

Summary of Contents for CallPilot 600r











































































































Reviews:

No comments