Avaya CallPilot 600r, Maintenance And Diagnostics, Page: 37 / 106

Parameter Description
target_name Specifies the name of the target host.
To run the tracert command from Windows
1. Click Start → Programs → Accessories → Command Prompt.
Result: The Command Prompt window appears.
2. At the Command prompt, type the following command:
tracert [-d] [-h maximum_hops] [-j host_list] [-w timeout]
[target_name]
Example: tracert 200.286.0.32
3. Press Enter.
Result: The system runs the tracert utility.
4. Type Exit to exit the Command Prompt window and return to Windows.
The ARP command
The ARP command displays and modifies the IP-to-physical address translation tables used
by Address Resolution Protocol (ARP).
ARP command syntax
The ARP command uses the following syntax:
arp -s inet_addr eth_addr [if_addr]
arp -d inet_addr [if_addr]
arp -a [inet_addr] [-N if_addr]
The ARP command
Avaya CallPilot® 600r Server Maintenance and Diagnostics December 2010 37