Avaya CallPilot 202i, Manual, Page: 83 / 92

Before you begin
Before you replace the hard drive, review the following:
Removing the server from the switch on page 80
Hard drive assembly diagram
Follow this procedure to assemble the hard drive.
To remove the hard drive
1. Ensure that the server is hard drive assembly side down on the antistatic mat.
2. Perform the following steps:
a. Remove the four screws that fasten the hard drive to the motherboard
and set aside the four fiber washers that are between the hard drive and
the motherboard for reuse.
b. Turn the server over and slide the hard drive toward the backplane
connectors to remove it from the socket.
Before you begin
Avaya CallPilot 202i Server Maintenance and Diagnostics December 2010 83