3. Press Enter.
The system runs the arp command.
4. Type Exit to exit the Command Prompt window.
The nbtstat command
The nbtstat command displays protocol statistics and current TCP/IP connections using NBT.
Nbtstat command syntax
The nbtstat command uses the following syntax:
nbtstat [-a remotename] [-A IP address] [-c] [-n] [-R] [-r] [-S] [-s]
[interval]
Parameter
Description
-a remotename
Lists the remote computer name table using its name.
-A IP address
Lists the remote computer name table using its IP address.
-c
Lists the contents of the NetBIOS name cache giving the IP address
of each name.
-n
Lists local NetBIOS names. Registered indicates that the name is
registered by broadcast (Bnode) or WINS (other node types).
-R
Reloads the LMHOSTS file after purging all names from the
NetBIOS name cache.
-r
Lists name resolution statistics for Windows networking name
resolution. On a computer configured to use WINS, this option
returns the number of names resolved and registered through
broadcast or through WINS.
-S
Displays both client and server sessions, listing the remote hosts by
IP address only.
-s
Displays both client and server sessions, and attempts to convert
the remote host IP address to a name using the HOSTS file.
interval
Displays selected statistics, pausing interval seconds between each
display. Press Ctrl+C to stop displaying statistics. Without this
parameter, nbtstat prints the current configuration information once.
The nbtstat command
Avaya CallPilot 202i Server Maintenance and Diagnostics
December 2010 41