Troubleshooting startup problems
on page 29
Startup diagnostic codes
HEX display diagnostic codes are divided into the following two categories:
• critical startup diagnostics
• non critical operating system and switch diagnostics
Critical startup diagnostic codes
All critical startup diagnostics must pass before the 202i can proceed with the start sequence. If
a critical diagnostic fails, the start sequence indefinitely halts, an error code displays, and you
here a continuous beep.
The following table shows the critical startup diagnostic codes with their corresponding failure
codes. Failure of these diagnostics means that there has been a server failure. The start cycle
halts.
Note:
When a test succeeds, the next test code appears.
Test code
Test description
Failure code
T:01
Internal RAM self-test
F:01
T:02
ALU self-test
F:02
T:03
Address mode self-test
F:03
T:04
Boot ROM self-test
F:04
T:05
Timer self-test
F:05
T:06
Watchdog self-test
F:06
T:07
EEPROM self-test
F:07
T:08
End of system controller self-tests
The power status LED blinks three times.
not applicable
HOST
Start of BIOS diagnostics
The monitor displays the BIOS start screen.
If a critical error occurs, the start cycle halts.
Examples of critical errors are memory
HOST continues to
scroll across the HEX
display
Startup diagnostic codes
Avaya CallPilot 202i Server Maintenance and Diagnostics
December 2010 25