Connecting the modem
Introduction
You must connect the modem to the 201i server if:
• you want to administer the 201i server from a remote location that does not have access to
the Avaya server subnet.
• you need assistance from Avaya technical support.
Required equipment
To install the modem, you need the following items:
• analog external modem that includes
- RJ-11 analog phone cord
- power adapter cord
- 56 kbps modem (NTRH9078)
• 25-pin male to 9-pin female shielded serial cable (A0601464)
• two 0.25-inch nuts for installation between the following:
- RS-232 connector thumbscrews on the multi I/O cable; maximum length 15 m (50 ft)
- 9-pin connector thumbscrews on the 25-pin male to 9-pin female shielded serial
cable
• analog line jack
To connect the modem
1. Ensure that the DIP switches are set as described in
2. Attach the serial cable as follows:
a. Connect the 25-pin male end of the serial cable to the modem.
b. Attach the 0.25-inch nuts to the thumbscrews on the 9-pin female
connector on the serial cable.
Connecting peripheral devices to the 201i server
124 Avaya CallPilot
®
201i Server Hardware Installation
December 2010