Locating the power supply modules
Introduction
Both AC power supply modules are installed prior to shipping. The following diagram shows
the location of the power supply modules in the rear panel (K):
Figure 9: 1006r rear panel
About the power supply module
After you power up the server (later in this guide), the power supply module LED indicates its
status.
A green LED on each power supply module indicates that the modules are working properly.
If the LEDs are unlit, red, or amber, the module is failing or has failed or the power cord
associated with the power supply is unplugged. A problem with a power supply module is also
indicated by a blinking or solid amber System Status LED on the front control panel.
Rack power and grounding
To ensure a complete power and grounding installation:
• In rack-mount server installations, ensure the Avaya CallPilot
®
server chassis and
equipment racks are isolated from other foreign sources of ground. Acceptable isolation
Connecting the server to power
40 Avaya CallPilot® 1006r Server Hardware Installation
December 2010