Configuration
Card slot
type
Slot
number
Position
Card type Meridian 1*/ CS*
1000
Note:
3 MGate cards connect to 1 MPB96
When cabling to MGate cards, the RJ-45 connectors are numbered
from 1 to 3 on the top NTRH40CAE5 MPB96 board and from 4 to 6 on
the middle NTRH40CAE5 MPB96 board starting from the right side of
the back panel (next to the power supplies)
Network connectivity
Introduction
This section describes how the 1006r server can be integrated into your network. The
integration depends on the type of switch you are using.
Important:
To secure the Avaya CallPilot server from unauthorized access, ensure that the CallPilot
network is inside your organization's firewall.
Sample network setup: Meridian 1
The following diagram shows a CallPilot server sample network setup with a Meridian 1 switch.
The Meridian 1 switch can be one of the following:
• Option 11C or Option 11C Mini
• Option 51C
• Option 61C
• Options 81 and 81C
Network connectivity
Avaya CallPilot® 1006r Server Hardware Installation
December 2010 17