Avaya Cajun P580, User Manual, Page: 92 / 770

2-42 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Chapter 2
CLI Command
To copy files, use the following CLI command in Enable mode:
# copy running-
* Note: Entering a + sign lists all of the applicable options for the copy
running-config command
Viewing the Status of a TFTP Transfer
After you have copied the startup configuration or other files to a TFTP
server, you can use either the Web Agent or the CLI to check the status of
the TFTP transfer to ensure that files copied correctly.
Web Agent
Procedure
To view the status of a TFTP transfer using the Web Agent:
1. Select File Management from the System > Configuration >
Configuration Files group in the navigation pane. The Configuration
File Management Web page opens (
Figure 2-19 ).
2. Select Status from the Get Status of Most Recent TFTP Copy field. A
status message displays in the Status pane.
CLI Command
While doing a TFTP transfer using the CLI, the status, either successfully
transferring or an error condition, is immediately returned.
* Note: You cannot view the status of a TFTP transfer done using the
CLI from the Get Status of Most Recent TFTP Copy field on
the Web Agent.
>
show startup-config