Avaya Cajun P580, User Manual, Page: 713 / 770

Document No. 650-100-700, Issue 1 25-53
80-Series QoS
Displaying the Buffer Settings for Egress Queues
Use the show port queue buffer command to display the amount of
memory that is assigned to each queue.
The syntax of the command is:
(configure)#
show port queue buffer {{<mod-num> | <mod-swport-
range>} [..., {<mod-num> | <mod-swport-range>}] | all-ports}
Table 25-33. Keywords, Arguments, and Options
Keyword, Argument or
Option Definition
<mod-num> The slot number of a module. If you specify
<mod-num>, the switch displays the number
of packet buffers that are allocated to the
egress queues on all ports on the module that
you specify.
<mod-swport-range> The slot number of a module, and, either a
port number, or a range of port numbers
having the format Px-Py. For example:
• To specify port 1 on the module in slot
3, enter 3/1.
• To specify ports 1 through 5 on the
module in slot 3, enter 3/1-5.
If you specify <mod-swport-range>, the
switch displays the number of packet buffers
that are allocated to the egress queues on the
port or range of ports that you specify.
{all-ports} All ports in the chassis. If you specify all-
ports, the switch displays the number of
packet buffers that are allocated to the egress
queues on all ports in the chassis.