Avaya Cajun P580, User Manual, Page: 680 / 770

25-20 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Chapter 25
Example
To set all ports on the module in slot 3 to mask the three least significant bits
of the DSCP, enter:
set port mask-diffserv 3 on
Assigning a Priority to a DSCP
Command
Use the set diffserv priority command to assign a priority to a DiffServ
code point (DSCP) in the DiffServ Mapping Table. The syntax of the
command is:
(configure)#
set diffserv priority <priority> dscp <dscp-start-
range> [<dscp-end-range>]
Example
To assign a priority of 7 to DSCPs 15 through 63, enter:
set diffserv priority 7 dscp 15 63
{on | off} Indicates whether the switch masks the three
least significant bits of the DSCP:
• Enter on to mask the bits.
• Enter off to not mask the bits.
The default setting is off.
Table 25-11. Keywords, Arguments, and Options
Keyword, Argument or
Option Definition
2 of 2
Table 25-12. Keywords, Arguments, and Options
Keyword, Argument or
Option Definition
<priority> The priority that you want to assign. Enter a
number between 0 and 7.
<dscp-start-range> The first DSCP in the range of DSCPs that
you want to assign the priority to. DSCPs
range from 0 to 63.
[<dscp-end-range>] The last DSCP in the range of DSCPs that you
want to assign the priority to. DSCPs range
from 0 to 63.