Avaya Cajun P580, User Manual, Page: 675 / 770

Document No. 650-100-700, Issue 1 25-15
80-Series QoS
Examples
Setting the Priority of a MAC Address
Command
Use the set aft entry command to set the priority of a source MAC address
or destination MAC address. The syntax of the command is:
(configure)#
set aft entry <mac-address> vlan {<vlan-id> | name
<vlan-name>} port-binding {filter | forward <mod-port-spec>}
[persistence {ageout | permanent}] [priority {normal | high}] [sa-
priority {port | aft <entry-priority> | max-port-aft <entry-priority>}] [da-
priority {port | aft <entry-priority> | max-port-aft <entry-priority>}]
Table 25-7. Examples: set port ignore-tag-priority
To... Enter...
Set all ports on the module in slot 3 to
ignore the 802.1p tag priority set port ignore-tag-priority 3 on
Set ports 1 through 5 on the module in
slot 3 to not ignore the 802.1p tag
priority set port ignore-tag-priority 3/1-5 off
Set ports 1 through 5 on the module in
slot 3 and port 1 on the module in slot
6 to ignore the 802.1p tag priority set port ignore-tag-priority 3/1-5,6/1
on
Table 25-8. Keywords, Arguments, and Options
Keyword, Argument or
Option Definition
sa-priority port Uses the priority of the physical port, Cisco
ISL tag, or 802.1p tag to determine the layer 2
priority of frames.
sa-priority aft Uses the priority that is assigned to the source
MAC address in the Address Forwarding
Table (AFT) to determine the layer 2 priority
of frames.
<entry-priority> The priority that you want to assign to the
source MAC address. Enter a number
between 0 and 7. This priority is stored in the
AFT entry for the MAC address that you
specify.
1 of 2