Avaya Cajun P580, User Manual, Page: 473 / 770

Document No. 650-100-700, Issue 1 15-23
Configuring the OSPF Routing Protocol
CLI Command
To display the OSPF neighbors using the CLI, enter the following
command:
> show ip ospf neighbor
Searching the OSPF Link State Database
You can search the OSPF kink state database using either the Web Agent or
the CLI.
Web Agent
Procedure
To search the OSPF link state database using the Web Agent:
1. Select Link State Database Search from the Routing > IP > OSPF
group on the Web Agent window. The Link State Database Search
dialog box opens (
Figure 15-12 ).
* Note: You can select more than one item in the Search By
column to help narrow your search results.
T-Option Specifies whether this neighbor is an ASBR.
MC-Option Specifies whether this neighbor supports MOSPF.
N-Option Specifies whether this neighbor supports the handling of Type-7 LSAs.
OPQ-Option Specifies whether this neighbor supports opaque LSAs (LSA type 9-11).
DR Choice Interface IP address of the designated router.
BDR Choice Interface IP address of the backup designated router.
Table 15-8. OSPF Neighbors Dialog Box Parameters
Parameter Definition
2 of 2