Avaya Cajun P580, User Manual, Page: 457 / 770

Document No. 650-100-700, Issue 1 15-7
Configuring the OSPF Routing Protocol
Deleting OSPF Areas
You can delete an OSPF area using either the Web Agent or the CLI.
Web Agent
Procedure
To delete an OSPF area using the Web Agent:
* Note: Before deleting an OSPF area, assign any interfaces that are
associated with the area to a different area or delete the
interfaces.
1. Select Areas from the Routing > IP > OSPF group on the Web Agent
window. The OSPF Area dialog box opens ( Figure 15-2 ).
2. Select the OSPF Area to be removed from the Select field.
3. Click DELETE. The OSPF area you selected is deleted.
CLI Command
To delete an OSPF area, use the following command:
* Note: Before deleting an OSPF area, assign any interfaces that are
associated with the area to a different area or delete the
interfaces.
<configure router: ospf># no area <area-id>
Modifying OSPF Areas
You can modify the parameters of an OSPF area using either the Web Agent
or the CLI.
Web Agent
Procedure
To modify an OSPF area using the Web Agent:
1. Select Areas from the Routing > IP > OSPF group on the Web Agent
window. The OSPF Areas dialog box opens ( Figure 15-2 ).
2. Select an OSPF Area to be modified from the Select field.
3. See Table 15-2 and modify the OSPF Area dialog box parameters.
4. Click Apply to save your changes, or Cancel to ignore your changes.
CLI Command
To modify an OSPF area using the CLI, use the following command:
(configure router ospf)# area <area-id> <option>