Avaya Cajun P580, User Manual, Page: 418 / 770

13-8 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Chapter 13
4. Click CREATE to save your changes, or CANCEL to restore previous
settings.
Creating Extended Access Rules
To create Extended Access Rules:
1. Select Access Lists from the Routing > IP > Configuration group on
the Web Agent window. The IP Access List dialog box opens
(
Figure 13-1 ).
* Note: The IP Access List dialog box displays all standard
and extended access rules that have been created. If
no rules have been created, the following statement
displays:
No IP Access Rules are
currently configured
.
2. Select Create Extended. The IP Extended Access Rule Creation
dialog box opens ( Figure 13-3 ).
Access Type Select the method of handling incoming datagrams based on
the IP access type from the following pull-down menu
options:
• Deny/Filter - Allows you to filter out (drop) packets
based on the specified configuration.
• Permit/Fwd pri8 (high) to pri1 (low) - Allows you to
prioritize traffic based on the specified configuration.
• Permit/Fwd with no change in priority - Allows you
to forward traffic with no change in priority.
Source Subnet • Source Address - Enter the IP address that you want
to deny or grant access to the switch. The Wildcard
will determine how the address is evaluated.
• Source Address Wildcard - Enter the Wildcard for
this address. For more information on wildcards, see
“
What are Wildcards? ” earlier in this chapter.
Table 13-1. Create Standard IP Access List Dialog Box
Parameters
Parameter Allows you to...
2 of 2