Avaya Cajun P580, User Manual, Page: 335 / 770

Document No. 650-100-700, Issue 1 12-19
Configuring IP Routing
Displaying Short-Lived IP Protocol Filters
CLI Command
To display the short-lived IP protocol filters that are currently enabled, enter
Global Configuration mode and use the following command:
show ip short-lived
Example
After you enter the show ip short-lived command, the switch displays the
filters that are currently enabled. For example:
ip short-lived tcp 112
ip short-lived udp 53
ip short-lived udp 123
Creating IP Static Routes
You can create IP static routes using either the Web Agent or the CLI.
* Important: Do not create a static route to a local interface. This
configuration is not supported.
Web Agent
Procedure
To create IP static routes using the Web Agent:
1. In the navigation pane, expand the Routing > IP > Configuration
folders.
2. Click Static Routes. The IP Static Routes Web page is displayed in the
content pane.
3. Click CREATE. The Add IP Static Route Web page is displayed in the
content pane. See Figure 12-6 .